dodo0145
wewWorks well with EN5038A in an NEC Powermate P3

Roxxor
worked for my USB adaptor

NepTun0
Works fine.

mambot
worked in 98se thanks..At long last the hardtofind driver for the Intel 845G chipset audio ac97 driver.It works for the buildin 82801DB AC97 audio multimedia controller.Thanks again....

Edao
THanks a lot

Mike-
Working fine Good one

djcool007
Worked great.

inga
ehhhhh ehhhh ehhhh ehhhhh ehhhhh ehhhhh ehhhhhe ehhhh ehhhh ehhhh ehhhhehhhehhhh ehhhe hhhhe ehhh ehhh ehhh ehhh ehhh ehhhh ehhheh ehhhh ehhhh ehhhhe hhhhe ehhhh ehhhh ehhhh ehhh ehhhh ehhhh ehhhh ehhhh ehhhh Please read the warning above before downloading this file.Download This File How To

LordHistory
have a problem com my sitema operatibo not istala the controllers usb in my pc as the license have a plate mother u8668d and cannot juan Morales helps atte santiago of chile on March 18 2005 recommendations to be contacted as soon as possible

spawn2511
Did not work on a gateway 500L wCameo chipset 845G

deAgostini
thanks

laymorgan
ok

Nehem
i will do you for this

alatar
Driver for Win9.x please visit at printers.nectech.comprintersindex.htm

odinnido
It is workingI am truly thankful to this site.Driversguide.com crew thanx.

vurlak
cam must be disconnected during setup. reconnect cam before reboot.windows should pick up new hardware.

zour
Driver is OK

sprmcmdr
Poprawnie dziaajcy driver pod adresem https ranger.Cameographics.com395drvlogin archivehaso archive

carrion
Anyone using Windows 98SE should be aware that this driver is not the correct driver for a cordless Genius HiMouse. Should I ever find the correct driver I will give my comments for that driver.

crion
Excellent

SKIPPER
The driver worked like a charm. I would recommend it to anyone.ok

panos9999
THANKSWon't work with W2K3 just crashes when installing the driver

FINGER
I needed this to make a cheap TV card work. Beware of the TVR patch file though as you will only need this if you need a basic PVR function with your card.

saviour16
Took me some time to find the download button scroll the page horizontally to the middle point but the driver worked very good with my MX98715AEC based adapter. Thanks a lot

janic10
I have a built in ATI rage pro turbo agp 2 MS6147 mb. I run the driver file remove the AGP adapter using device manager reboot the PC. Windows 98SE detects the ATI Rage Pro turbo agp 2 onboard adapter and requests a driver. I point Windows 98SE to the driver file downloaded and windows installs the driver and device manager recognises the agp adapter but indicates there is a problem with this device. Clicking on properties shows the following message Windows cannot initialise the built in graphics adaptor. The advice given to correct this problem has been followed without succsss.The download and driver install did not raise any problems and after installCameoon the ATI Rage Pro Turbo AGP 2X graphics adapter was correctly identified within the device manager. I can only assume I used an incorrect graphics adapter driver or the motherboard is at fault. Everything looked good. I may have made a mistake when downloading this and the previous driver because both drivers appeared to be the same i.e size name etc.Thanks.Thanks.

xudd
ok isupposeeyrrrrrrrrrra kjy

muxx
The driver didn't work

nickelbackxonlyme
Didnt work with WinXp Thanks